你的位置:首页 > 新闻动态 > SICK资讯

西克sick传感器在日常使用中需要注意哪些方面呢?

来源: 2019-1-2 8:42:15      点击:

西克sick传感器在日常使用中需要注意哪些方面呢?

在使用UE410 flexi modular safety controller或受UE410 flexi modular safety controller保护的机器之前,

请仔细阅读本章

。2.1专业人员UE410柔性模块化安全控制器必须由专业人员安装、调试和维护。专业人员是指……已经接受了适当的技术培训,并接受了负责机器操作的机器操作员的指导,以及当前有效的安全指南和指令,能够使用UE410 flexi和特定模块的操作说明,并且已经阅读并熟悉了与安全控制器相连的保护装置(如C4000)的操作说明,并已阅读并熟悉。

2.2设备的应用UE410灵活模块化安全控制器是一个可配置的安全应用控制系统。符合EN 954-1的控制类别或符合EN 61508的SIL取决于外部电路、接线的实现、传感器的选择及其在机器上的位置。根据EN 954-1,该装置对应的控制类别为

4;根据IEC 61508,应用可达到SIL3。根据EN 60204-1,装置中的紧急停止功能对应于停止类别0或1。

注意警告!当将安全输出(q1.q4)单独连接到启用输入(en)或UE410-2ro/UE410-4ro时,根据EN 954-1,只能达到控制类别

3。为了达到符合IEC 61508标准的SIL3安全等级(见第99页第12章“技术数据”),

必须至少每365天进行一次以下测试:【阴】必须关闭UE410柔性系统电源。【阴】必须打开UE410柔性系统电源。【必须验证连接安全传感器的所有安全功能】必须根据要实现的控制类别选择安全传感器的类型和接线方法。


his chapter deals with your own safety and the safety of the equipment operators. Please read this chapter carefully before working with the UE410 Flexi modular safety controller or with the machine protected by the UE410 Flexi modular safety controller. 2.1 Specialist personnel The UE410 Flexi modular safety controller must be mounted, commissioned and serviced only by specialist personnel. Specialist personnel are defined as persons who ... have undergone the appropriate technical training and who have been instructed by the responsible machine operator in the operation of the machine and the current valid safety guidelines and have access to the operating instructions of the UE410 Flexi and those of the particular modules and have read and familiarised themselves with them and have access to the operating instructions for the protective devices (e.g. C4000) connected to the safety controller and have read and familiarised themselves with them. 2.2 Applications of the device The UE410 Flexi modular safety controller is a configurable control system for safety applications. The control category in accordance with EN 954-1 or the SIL in accordance with EN 61508 depends on the external circuit, the realisation of the wiring, the choice of the sensors and their location at the machine. The device corresponds to up to control category 4 in accordance with EN 954-1; applications can reach up to SIL3 in accordance with IEC 61508. The emergency stop function in the device corresponds to stop category 0 or 1 in accordance with  EN 60204-1. ATTENTION Warning! When wiring safety outputs (Q1Q4) individually to an ENABLE Input (EN) or to a UE410-2RO/UE410-4RO it is only possible to reach up to control category 3 in accordance with EN 954-1. In order to reach the SIL3 safety level (see Chapter 12 “Technical data“ on Page 99) in accordance with IEC 61508 the following test must be made at least every 365 days: The UE410 Flexi system must be powered down The UE410 Flexi system must be powered up All safety functions of the connected safety sensors must be verified The type of safety sensors as well as the method of wiring must be chosen according to he control category which is to be achieved

上海律立贸易有限公司(www.lvlimy.com)主要销售:SMC电磁阀,SMC气缸, FESTO气缸,FESTO电磁阀,图尔克TURCK传感器,SICK,传感器,邦纳传感器,欢迎您的来电!